80 mm perfect for setting rebates and grooves on router tables for height and backset of the cutter with meticulous accuracy.Accurate to +/- 0.1mm, essential for setting up or resetting a position for routers and saw blades.Always use the rip fence or miter gauge when using bits without pilots. Starting with the depth of cut set at 8 ', and increasing the depth of cut ' with each. 'The Rockler Router Bit Center Depth Gauge allows you to do both quickly and accurately.' To set up a router table for cutting grooves or dadoes, the user slides the clear beveled indicator to the desired metric or imperial mark on the 12' rigid steel ruler and locks in the setting by tightening the knurled knob. When using bits over 1/2 diameter, limit depth of cut to 1/8.

end up owning about 31 Finisar Corporation (FNSR) Stock Charts In-depth view of. Made from injection moulded plastic, with a plastic rule, it includes a small rebate clip that fits to the base of the rule to allow the rule to be set flush to a router table back fence. Chuck a 12 ' top - bearing pattern bit in your handheld router. Fear Gauge Drifts Lower FNSR (FNSR) has 1 split in our FNSR split. Read-out has relative co-ordinate and absolute function. would have been spent chiseling and using a depth gauge to get the background even.

Pin can be parked on arm (hole depth 50.8mm / 2'). To do this, I found the center of the arm and drilled a small hole.

It is self standing with magnetic feet and a flat back and features a removable pin to allow hole depths to be measured. Measures rebates, back fences, cutter projections and more, for use with hand routers, router tables and saw benches. Ideal for setting and checking depths for routing and sawing applications. LCD readout for mm, imperial and fractions. Digital depth gauge ideal for use with router tables and saw benches.

Router bit center depth gauge